Delta Controls Vietnam | List hàng | RS245SV703H02 | Aug2014

Pressure switch	15 to 75 Bar	RS245SEF03H02	Delta Controls
Pressure switch	2,5 To 25 Bar	RS245SV703H02	Delta Controls
Pressure switch	ZONE 1 ATEX For Aggressive Atmospheres Eexd, IIC T6( -60 toe +65 C) T5 (-60 to+80 C) Investment cast enclosure in austenitic stainless steel certified to CENELEC EN 50, 014 and  EN50 018, Weatherproof to NEMA type 4X, IP66- Electrical entry: M20 x 1.5 Dual Entry, Material of wetted parts: 316 stainless steel diaphragm, process connection and Viton O-ring seal., Pmax: 600 bar, Range: 10-100 bar, Switch option: 2 Amps @ 30V DC, 2 switch with NO, NC., Process connection: 1/2 NPT INT, Option and treatment: Marine and Offshore Saline atmosphere or salt spray	RS245SFA03H02	Delta Controls
Pressure switch	ZONE 1 ATEX For Aggressive Atmospheres Eexd, IIC T6( -60 toe +65 C) T5 (-60 to+80 C) Investment cast enclosure in austenitic stainless steel certified to CENELEC EN 50, 014 and  EN50 018, Weatherproof to NEMA type 4X, IP66- Electrical entry: M20 x 1.5 Dual Entry, Material of wetted parts: 316 stainless steel diaphragm, process connection and Viton O-ring seal., Pmax: 600 bar, Range: 10-100 bar, Switch option: 2 Amps @ 30V DC, 2 switch with NO, NC., Process connection: 1/2 NPT INT, Option and treatment: Marine and Offshore Saline atmosphere or salt spray	RS245SEA03H02	Delta Controls
IR fire detector	4-20 ma output	X9800S4N13W2	Dettronics
Four chanel monitor module	2201 monitoring system. 0.7 Amps BNC Solar P1N190662-23 ( or -24, -26, -28 ?)	102577-01	Bently Nevada
System vibration monitor module	2201 monitoring system. 1.0 Amps BNC Firmware revision J (Solar PIN190662-11)	127234-01	Bently Nevada
Vibration promitor	3300XL 11mm	330780-50-05	Bently Nevada
Vibration probe 3300XL		330704-00-050-10-02-05	Bently Nevada
Dual vibration monitor Xygap		3300/16-XX-03-03-00-0 1-00	Bently Nevada
Proximitor	Mod 154708-01 (Solar P/N 120662-18), scale factor 25mV/G	49578-01	Bently Nevada
Vibration Probe 3300 XL	Cable resistance 95Ohm. Cable length 1m. Tip material polyphenylene supplied. Tip diameter 0.3'' (8mm), thread size 3/8-24 probe length - 50mm connector type - standards	330102-00-20-10-02-05	Bently Nevada
Probe 5-Meter system, 7200 series 95 Ohm	Cable length 1m. Cable resistance 95 Ohm. Tip material polyphenylene suplide. Tip diameter 0.3" (8 mm), thread size 3/8"-24	102048-00-48-10-02	Bently Nevada
Vibration Probe 3300 XL	Cable resistance 95 Ohm. Cabellength 1m. Tip  material polyphenylene suplide. Tip diameter 0.3" (8 mm), thread size 3/8"-24 probe lenght - 125 mm connector type - standard	3301 02-00-50-10-02-05	Bently Nevada
Vibration proximitor		330180-50-05	Bently Nevada

Delta-Controls UK | List hàng | RS245SFA03H02 | Aug2014

Pressure Switch, RS245SEF03H02	Delta-Controls UK
Pressure Switch, RS245SV703H02	Delta-Controls UK
Pressure Switch, RS245SFA03H02	Delta-Controls UK
Pressure Switch, RS245SEA03H02	Delta-Controls UK
Doc from Manufacturer	Delta-Controls UK
X9800S4N13W2, Art-No. 008714-001 IR fire detector SS, 3/4NPT, relay/4-20mA	Dettronics USA
holder, stainless steel, Art-No. 007290-001	Dettronics USA
330780-50-05	Bently Nevada
330704-00-050-10-02-05	Bently Nevada
49578-01	Bently Nevada
330102-00-20-10-02-05	Bently Nevada
330102-00-50-10-02-05	Bently Nevada
330180-50-05	Bently Nevada

VM PRESSURE SWITCH | DELTA CONTROLS VIETNAM | DENTAL CONTROLS VIỆT NAM

ZOOM

Volume

Ex d / WP

The model VM Pressure Switch is suitable for setpoints between 0 and 700 bar with maximum working pressures up to 1000bar

• FEATURES & BENEFITS
• DOCUMENTATION
• SUPPORT

1.  Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
2.  Compact Ex d enclosure
   VM series switches combine Ex d approvals with a compact terminal enclosure making them ideal for OEM applications.
3.  Safety
   All VM models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure.

The VM Series Switch is designed with OEM users in mind and offers users a simple, compact, robust and ATEX Ex d approved Switch.

• Ranges available from 0 to 700bar
• Weatherprrof IP66 enclosures stainless steel
• ATEX Ex d Flameproof models available
• Environmentally and Hermetically sealed switch options
• Set-point adjustable over the full range against a calibrated scale with tamperproof adjuster

T02 TEMPERATURE SWITCH | DELTA CONTROLS VIETNAM | DENTAL CONTROLS VIỆT NAM

ZOOM

Sentry Series

Weatherproof / Ex ia

• FEATURES & BENEFITS
• DOCUMENTATION
• SUPPORT

1. Hinged lid
   A unique hinged lid gives users access to the contact terminals and set-point adjuster quickly and simply via a single captive screw
2. Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
3. 5 year warranty
   A market leading 5 year warranty gives users peace of mind
4. Safety
   All Sentry models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, the complete Sentry family has been assessed for use in SIL 2 safety related systems.

Based on the success of the “Industrial” range of process control instrumentation, Delta Controls has developed the “Sentry” range of Pressure, Differential Pressure and Temperature Switches.

Designed for general purpose use in OEM equipment and industrial power applications alike, Sentry combines economy, quality and performance.

With a better than 1% set-point repeatability and a market leading 5 year warranty, Sentry offers real value.

Users also benefit from a unique hinged lid and single captive screw which provides quick and easy access to terminals and set-point adjustment. The inclusion of a safety vent also protects users by preventing the enclosure becoming pressurised in the event that the sensor is inadvertently damaged by excessive pressure.

• Robust weatherproof, epoxy coated, aluminium housing approved to IP66 and NEMA 4X
• SPDT and DPDT switch contacts with environmentally and hermetically sealed options
• Stainless steel wetted parts as standard
• Better than 1% set-point repeatability
• Market leading 5 year warranty
• Pressure ranges from 0.4 to 700 bar (4 to 1500 psi)
• Pmax up to 1000 bar depending on range

T01 TEMPERATURE SWITCH | DELTA CONTROLS VIETNAM | DENTAL CONTROLS VIỆT NAM

ZOOM

Sentry Series

Weatherproof / Ex ia

• FEATURES & BENEFITS
• DOCUMENTATION
• SUPPORT

1.  Hinged lid
   A unique hinged lid gives users access to the contact terminals and set-point adjuster quickly and simply via a single captive screw
2.  Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
3.  5 year warranty
   A market leading 5 year warranty gives users peace of mind
4.  Safety
   All Sentry models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, the complete Sentry family has been assessed for use in SIL 2 safety related systems.

Based on the success of the “Industrial” range of process control instrumentation, Delta Controls has developed the “Sentry” range of Pressure, Differential Pressure and Temperature Switches.

Designed for general purpose use in OEM equipment and industrial power applications alike, Sentry combines economy, quality and performance.

With a better than 1% set-point repeatability and a market leading 5 year warranty, Sentry offers real value.

Users also benefit from a unique hinged lid and single captive screw which provides quick and easy access to terminals and set-point adjustment. The inclusion of a safety vent also protects users by preventing the enclosure becoming pressurised in the event that the sensor is inadvertently damaged by excessive pressure.

• Robust weatherproof, epoxy coated, aluminium housing approved to IP66 and NEMA 4X
• SPDT and DPDT switch contacts with environmentally and hermetically sealed options
• Stainless steel wetted parts as standard
• Better than 1% set-point repeatability
• Market leading 5 year warranty
• Pressure ranges from 0.4 to 700 bar (4 to 1500 psi)
• Pmax up to 1000 bar depending on range

S71 TEMPERATURE SWITCHES | DELTA CONTROLS VIETNAM | DENTAL CONTROLS VIỆT NAM

ZOOM

Industrial Series

Weatherproof / Ex d

The model S71 Temperature Switch comes with a rigid or semi-rigid thermal system and is suitable for setpoints between -40°C and +260°C with maximum working temperatures up to 270°C

• FEATURES & BENEFITS
• DOCUMENTATION
• SUPPORT

1. Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
2. Extensive range of approvals
   The Industrial Series switches are available with wide range of different approvals including European and North American Hazardous Area approvals
3. Safety
   All Industrial Series models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, all models have been certified for use in safety systems up to and including SIL 2.

The Industrial Series switches were developed in the mid-1990's to offer customers a robust range of switches suitable for applications where requirements were more standard than those for which the highly configurable Performance Series switches were designed.

Using diaphragm based sensors and a more traditional in-line force balance mechanism to transfer movement from the sensor to the microswitch, these switches are suitable for a wide range of industrial applications. Various international approvals make the Industrial Series suitable for use in both safe and Hazardous Areas in Europe, North America and throughout the world.

With the recent launch of the Sentry Series, these Industrial models are now recommended mainly for aftermarket applications where a like for like replacement is needed.

• Epoxy coated aluminium or stainless steel housings approved to IP66 and NEMA 4X
• SPDT and DPDT switch contacts with environmentally and hermetically sealed options
• Stainless steel wetted parts as standard
• Better than 1% set-point repeatability
• Temperaturee ranges from -40°C and +260°C
• Tmax up to 270°C depending on range

S34 DIFFERENTIAL PRESSURE SWITCH | DELTA CONTROLS VIETNAM | DENTAL CONTROLS VIỆT NAM

ZOOM

Industrial Series

250bar Pmax

The model S34 Differential Pressure Switch is suitable for setpoints between 6mbar and 10bar with maximum working pressures up to 250 bar

• FEATURES & BENEFITS
• DOCUMENTATION
• SUPPORT

1.  Better than 1% set-point repeatability
   Users can expect a set-point repeatability performance better than 1% on all configurations with some configurations being significantly better
2.  Extensive range of approvals
   The Industrial Series switches are available with wide range of different approvals including European and North American Hazardous Area approvals
3.  Safety
   All Industrial Series models come with a safety vent to prevent the enclosure becoming pressurized in the event that the sensor is inadvertently damaged by excessive pressure. In addition, all models have been certified for use in safety systems up to and including SIL 2.

The Industrial Series switches were developed in the mid-1990's to offer customers a robust range of switches suitable for applications where requirements were more standard than those for which the highly configurable Performance Series switches were designed.

Using diaphragm based sensors and a more traditional in-line force balance mechanism to transfer movement from the sensor to the microswitch, these switches are suitable for a wide range of industrial applications. Various international approvals make the Industrial Series suitable for use in both safe and Hazardous Areas in Europe, North America and throughout the world.

With the recent launch of the Sentry Series, these Industrial models are now recommended mainly for aftermarket applications where a like for like replacement is needed.

• Epoxy coated aluminium or stainless steel housings approved to IP66 and NEMA 4X
• SPDT and DPDT switch contacts with environmentally and hermetically sealed options
• Stainless steel wetted parts as standard
• Better than 1% set-point repeatability
• Pressure ranges from 6mbar to 10 bar 
• Pmax up to 250 bar depending on range